Tuesday, February 18, 2014

Removing a Supernova Balance Wheel

The first time I had to remove the balance wheel from a Necchi Supernova, I was a bit confused.  I removed the nut but there was no torque washer underneath and the balance wheel would not come off the shaft tail.  When I finally learned, I took photos and now Frank is having the same issue so I decided to post those photos to help Frank and anyone else who hasn't figured this out yet.

STEP 1 - Loosen the two screws in the knurled nut and unscrew.


STEP 2 - The entire inner circle is the torque washer.


STEP 3 - Slide the washer off the shaft.


STEP 4 - Remove the belt and slide the balance wheel off the shaft tail.


Installation is the reverse of removal. If the balance wheel does not spin freely when winding a bobbin, try swapping the two screws in the knurled nut. One is longer than the other and that's how Necchi solved the problem of the torque washer being installed backward.

Ed

Ed's Vintage Sewing Machine Shop
Kathie's Online Quilt Shop

Saturday, February 15, 2014

Auction Update

We went to the auction last night and I'm glad I'm not in the beginning phases of collecting sewing machines, because I probably would have had to make two trips to carry home all my purchases in my minivan.

The first machine up for bids turned out to be a Wheeler & Wilson W9. This is kind of a landmark model because it was the last domestic machine made by W&W before Singer took over their plant and switched it to industrial machines. The 'W' in Singer industrial model numbers like 111W155 indicate they were made at the former Wheeler & Wilson factory.  Regardless of the collectability, this machine only brought $45.


Next was the Singer 15 in a 6-drawer cabinet sitting next to the W&W.  


Being a more recognizable name and in obviously better cosmetic condition, bidding ended at $65.

After a delay while they auctioned off tray lots and box lots of household items, they came to the Martha Washington sewing cabinet.  


We have two of those and paid over $100 for each.  This one needs some love but appears to be in original condition.  It only brought $40.

Last, they got to the Singer 99-13 portable in the drop-in table.  I got a chance to look underneath during the preview and learned that that kneebar hanging down below the table is physically connected to the machine, not a separate controller. Space was tight under there and I didn't have a flashlight so I couldn't investigate further.


This was the only machine I even considered bidding on solely because of the uniqueness of the table but bidding got to $85 and I was unwilling to spend that more than that for a very common machine in an intriguing table.

I had hoped there would be some vintage sewing attachments and accessories separate from the machines.  There were several boxes of sewing "stuff" but it was just thread, needles, binding and other notions I would never use, so I didn't even stay to see what they sold for.  For an evening's entertainment, I spent $1.95 for a soft drink and came home empty-handed.

http://www.etsy.com/shop/OldSewingMachines
http://www.etsy.com/shop/OldeTowneStitchery



Wednesday, February 12, 2014

Auction

I was surfing the local auction website to see what is up for sale Friday evening.  First thing I noticed was this neat little table designed to hold a Singer 99 in the beehive case without removing the head from the base.  I have been collecting old sewing machine for over 40 years and have never seen a table like this.


  I see a kneebar on the machine and a knee control under the table, I have no idea how the machine is controlled when it is mounted in the table.

  Next, I saw these two machines


  and this cabinet


  I'm beyond black straight stitchers and don't have space for treadles but with all those vintage sewing machines, this must be the estate of someone who sewed for many years and there might be some other vintage sewing paraphernalia worth bidding on.  I just might have to go and scope it out.

http://www.etsy.com/shop/OldSewingMachines
http://www.etsy.com/shop.OldeTowneStitchery




Saturday, February 08, 2014

Big Thread, Little Spool Pin

This is not specifically about sewing machines, but closely related:

When we had the store, we stocked the large 1200 yard spools of Star Thread made by Coats and Clark.


 The problem buyers encountered was that the hole through the center of the spool is 5/8 inch in diameter, the spools wiggled and rattled when installed on the sewing machine's spool pin and the thread unwould unevenly.

  My solution is to use a thread stand but not everyone wants to carry a thread stand along on sew-ins and retreats.  We still have a couple of dozen spools of Star and it's not selling in Kathie's Etsy store so it looks like we are going to have to use it up ourselves.

  I went to the local home improvement store and picked up some tubing with a 1/4 inch inside diameter and 3/8 inch outside diameter for about 21 cents per foot. That was not large enough to fill the hole, so I also picked up some other tubing with 3/8 inch inside diameter and 1/2 inch outside diameter for about 39 cents per foot.


  I slipped the smaller tubing inside the larger tubing for 2 1/2 inches (the length of the Star spool) and sliced it off with a utility knife.


  The 1/4" inside tube fits snugly over my spool pin and the 1/2" outer tubing takes up most of the space inside the Star spool so there is less rattle and the thread comes off the spool more evenly.


 I can make 5 inserts for 60 cents worth of tubing.  Maybe providing an insert with each spool of thread will spur some sales, I already have enough thread to last my lifetime.

http://www.etsy.com/shop/oldsewingmachines
http://www.etsy.com/shop/oldetownestitchery


Thursday, January 30, 2014

Singer Foot Control

Yesterday, I took in an old Singer 327k that was having a problem with the foot control. 


It had been retrofitted with a clamshell type foot control and, many times the owner would step on the pedal and nothing would happen. My first thought was a loose connection in the foot control or a bad wire between the foot control and the motor but neither turned out to be the issue.

To troubleshoot, you have to access the inside of the speed control.  Turn the control over and pop off the big round cap.  Remove the screw beneath and the other screw over by the hinge. BEFORE OPENING THE FOOT CONTROL, DISCONNECT POWER. EVERY PIECE OF METAL INSIDE THAT FOOT CONTROL IS "HOT" AT ONE TIME OR ANOTHER!



Many of these old Singer speed controllers use the carbon pile method of regulation. A ceramic cylinder is filled with smaller-than-dime-size graphite discs.  


At one end of the cylinder is a stationary contact that serves a secondary purpose of holding the stack of carbon discs in place.  


At the other end of the cylinder is a movable contact that pushes on the carbon pile when the pedal is pressed.

When the discs are at rest, they provide such a high level of resistance that no current flows to the motor.  When the pedal is depressed and the discs are squeezed together, they allow current to flow to the motor.  The tighter they are squeezed, the more current flows to the motor and the faster it runs.


When the pedal is fully depressed, an internal set of contacts in the speed control by-passes the carbon pile and shoots maximum current directly from the wall outlet to the motor.  


Knowing this gives a hint on troubleshooting a speed control - If nothing happens until the pedal is fully depressed and then the motor runs at full speed, the issue is with the carbon pile or other rheostat used in regulating speed.

In this instance, I could see that no matter how much the pedal was pressed, the carbon pile was not being squeezed.  It turned out that the stationary contact was bent and not holding up its end of the bargain.  When the pedal was pressed, the carbon pile just slid to the other end of the cylinder without being compressed.  No current was allowed to flow, so the motor didn't budge.  

It took a couple of tries to bend the stationary contact to just the right spot - too much to the left and the motor hummed, even with the pedal not pressed; too much to the right and the motor didn't move until the pedal was almost to the floor.

You don't want current flowing to the motor when the pedal is at rest because heat could build up and cause a fire.  A voltmeter would be a handy tool to determine the proper adjustment, but if you can see an air gap between either contact and the corresponding end of the carbon pile, no current is flowing.
http://www.etsy.com/shop/OldSewingMachines
http://www.etsy.com/shop/OldeTowneStitchery 


Thursday, December 26, 2013

Update

Lots has happened in the past few weeks.

We closed the quilt shop. After 18 months with not a single profitable month, we got tired of continuously pouring our savings into stock, rent, and other expenses and pulled the plug.  It took two weeks to bring all the remaining stock and fixtures home and now we are trying to sort it all out.  Kathie should not need to buy fabric for years to come.




I have been loading the remaining stock into Kathie's Etsy shop at discounted prices.  A link is at the side of the page.

I split off my vintage sewing machine items from Kathie's store and set up my own Etsy shop with just sewing machine-related items. I have lots more to list but it's a start. I have placed a link to my shop at the side of the page, also.

I have eight Singer motors waiting to be re-wired but won't get to them anytime soon.



Sunday, December 08, 2013

The 66 is Finally Finished!

  I spent most of the day putting the finishing touches on this machine.  All I had left was the tension assembly and the bobbin winder and it would be ready for testing.  The bobbin winder went without a hitch. I love those old bobbin winders with the guide finger that precisely positions the thread winding on the bobbin so it comes out perfect. I'm sure that economics was the reason they were replaced with the lower quality contraptions on later machines because there are  many more parts and moving parts on the older winders.

  On to the tension assembly - when I separated the tension discs, there was a piece of thread lodged between them, possibly the cause of some previous tension problems.


  I cleaned and reassembled the tension assembly and installed it. It regulated tension all right, but did not release when the presser foot was raised. Do you see anything wrong with this tension assembly component?


  Neither did I the first time around but I knew there should be some piece with a bar passing between the sides of the split stud. The pin in the tension assembly needs something to push against to release the spring pressure from the outer disc.  The part should look like the one on the right here


  I threaded it and found that the upper thread would not pull up the bobbin thread.  The hook was a bit out of time from being disassembled for cleaning. After re-timing the hook, the machine seemed to be binding. I had adjusted the feed dog centering and tightened the screw back down too tight. with the machine running smoothly and sewing like it shoud, I noticed that one of the motor wires had a gap in its insulation so I had to replace the motor again and find a belt to fit. It seemed like it was one thing after another and took all day. We are in the middle of an ice storm, so I wasn't going anywhere anyway, but I could have found other tings to do with the time.

Here is the finished product. Not the best looking machine I have ever put out the door but considering the condition it arrived in, not too bad.


Saturday, November 30, 2013

Singer 66 Update

Progress is happening on the 66 I blogged about earlier.

Step 1 - I stripped it down to bare bones




Step 2 - Cleaned all the old brown scum off and polished any brightwork that couldn't be easily removed.  Notice the many rust spots on top, I'll get back to them later.



Step 2 - Cleaned up all the removed parts and reinstalled.  See the red felt in the hook area? That is there as an oil reservoir to supply lubrication to the hook. Many owners think it is a ball of lint and pull it out. Some day I will work up a tutorial on how to replace that felt.



Step 3 - I don't think I'll reinstall this motor, that wiring looks like an accident waiting to happen.


 I'm sure I have a comparable motor in my motor tub.



Step 4 - I applied rust converter to the rust spots.


This converter is advertised to turn rust into black primer. While flat black spots are not the most desirable, they are better than rust spots. I think the rust converter would have done an even better job except that I had wiped down the head with sewing machine oil before applying the converter. I wiped the paint down with degreasing wipe but that wouldn't get the oil soaked into the rust. If I had thought, I would have done it in the reverse order.


I still have to clean and reinstall the tension assembly, bobbin winder, and faceplate.  Then comes the job of testing and adjusting. I think it will be finished soon, glad I didn't have any other machines show up for servicing while I had this one in pieces.

Tuesday, November 26, 2013

Industrial Sewing Machines for Home Use




Everyone knows that industrial machines sew better, last longer, and are more reliable than domestic sewing machines but many sewists are reluctant to acquire one due to the size, weight, speed, and noise.  The noise is attributed to the clutch motor that runs all the time and only powers the sewing head when the operator steps on the pedal and energizes the clutch.


This noise problem has been overcome in recent years by the DC servomotor that acts like a domestic foot controlled motor - it does not run (makes no noise) unless the operator steps on the pedal, then the motor spins the sewing machine.  While the servomotor solves the noise problem, it still has to be mounted in a power stand so the issues of size and weight are still present.


Many years ago, I obtained a Singer 95-10 tailoring machine.  It had a clutch motor but I didn't have a belt to fit and my parts bin had several motors, belts, and foot controls, so I decided to try powering it with a motor off a home machine.  To my surprise, the machine worked quite well and sewed everything I put under the presser foot. It was still mounted in a power stand but I had the space so that was not a problem.


When I got my Singer 20U-33, I bought only the head.  I saw that there were motor bracket mounting provisions below the balance wheel that looked like those on a home machine so I bolted a motor from an old Brother in place and sewed away.


My internet friend Rich in Tennessee carried things a bit further, he built a wooden box to hold the sewing head and a motor mount and powered a big, honkin' walking foot upholstery machine with a domestic motor. Rich has solved the issues of size, noise, and speed.  Don't think that his is a portable though, it probably weighs in the 60-70 pound range.


You would think that a little 1/15 horsepower motor would not spin an industrial machine designed for a 1/4 - 3/4 hp motor but the answer is in the sizes of the pulleys. The pulley on the 1/3 hp clutch motor pictured above is 11 inches in circumference.  It drives a balance wheel that is also 11 inches in circumference. The motor pulley on a domestic machine is 3 inches in circumference, so there is almost a 4-1 reduction and the 1/15 hp motor appears to be much more powerful.

This solves another issue of industrial machines - the speed.  Many are intimidated by 3500 stitches per minute but with a 4-1 reduction, the machine will only sew about 900 SPM with a domestic motor - the same speed as the average domestic machine.  That speed is more easily controlled by the foot control and the operator doesn't need to learn the procedure for operating a clutch motor.

Food for thought


Saturday, November 23, 2013

What Have I Done to Deserve THIS? Singer 66

A lady brought her Great-Grandmother's sewing machine into the shop for servicing this afternoon.  She said it had been stored in an unfinished basement for fifty years more or less.



 It had originally been in a treadle cabinet but was converted to electric somewhere along the line.  The Great-Granddaughter has the original treadle cabinet and wants to eventually de-convert the sewing head back to treadle configuration.  For now, she wants to use it as an electric machine until the wood cabinet is restored.

My first thought was that any machine stored in an unfinished basement for half a century would be too rusted to ever put back into sewing condition but Looking at the hook area, the rust appears to be light and I think it will buff off.


The electricals are shot


The stretch rubber belt is cracked in many places, the spring that holds the slide plate is missing



And the bobbin winder looks like a fused mess of corrosion and dirt.


On the bright side, I have parted out a number of 66's and have lots of spare parts in the parts bins. I think I can get this old lady sewing although it will never look new again.