Sunday, October 02, 2011

Viking 64 40



In Fredericksburg, Virginia for a business meeting a few weeks ago, I noticed a Goodwill Store across the street from the hotel where the meeting was being held. Never one to pass up a chance to paw through junk, I headed across the street at the first opportunity. There was only one sewing machine, from a distance, I thought it was a modern plastic Singer and nothing I would be interested in. On closer inspection, it turned out to be a Husqvarna Viking 6440, manufactured in the '75 - '77 timeframe, in good cosmetic condition but frozen solid. Vikings are not common in my area, this was only the third one I have ever seen but it was complete, in good condition, with foot control and some extras and the price was right so it came home with me.

A few years back, I owned a 5000 series and a 6000 series ex-school Vikings and they were pure junk. I couldn’t see why anyone would ever buy a Viking, much less rave about it.  



What I did like, however, was their foot controls. 



Instead of a wiper arm sliding across a rheostat, the Vikings of that era use a wheel rolling across a rheostat.  This makes for much smoother operation and less chance of the foot control sticking. 



They also have a safety feature that completely disconnects power when there is no pressure on the pedal. I still have one of my original foot controls but have been hoarding it until I could find a machine worthy of it. 

When I saw that this Viking had the foot control, I figured that alone was worth the $12.95 sticker price, so I picked it up.

When I got this one home and opened up, I found that even though the exterior was spic & span, the spider webs inside indicated it hadn't been used in some time and had been stored in less than ideal conditions. It took lots of exercising to free up the mechanisms but in about an hour, it started sewing and gets continually better.



It has the slide-on accessory tray that probably wasn’t meant to sew on, but I do anyway, since the table extension was not included. In the tray were some bobbins and a couple of accessories, but by no means a full bag.

I wasn’t expecting much, considering my history with Vikings, but when I started sewing a small project, I was in for a shock! The machine is smooth, quiet, and produces an excellent stitch. Now, I can see why Viking owners are proud of their machines, they probably bought them new and performed all the required maintenance, unlike the school system that produced my first two Vikings.



It only has the “A” cam, so I only have four stitches in addition to straight stitch and zig zag but 99% of my sewing is straight stitch, 0.9% zig zag, and only 0.1% decorative stitch, so I can live without all the fancy stitches. Guess I’ll keep it until it needs some kind of repair, and then I’ll put the foot control on a Necchi Supernova and sell the Viking for parts.

46 comments:

Bitwise XOR said...

Love your blog. I have a White Model 999 that I have named Blanche. Someday I hope to understand her half as well as you understand Vikings and Singers.
Thanks. :-)

Tammy said...

I have a 1979 Husqvarna 6570 complete with accessories, extension table and all the cams. It is an awesome sewing machine! Plus an added bonus the front of mine is red. I named her Ruby. Please feel free to check it out here: http://tammyscraftemporium.blogspot.com/2010/05/husqvarna-6570-ruby.html

Michelle said...

I had a Viking similar to this one, or it could have been the same one...not sure. Anyway, one night it started smoking, so I unplugged it and set it outside the back door. That weekend, I took it to a Viking dealer who has a whole upstairs building full of old sewing machines, including vikings, and we left it with him to check out. Since we were from out of town, he told us if we came back in a few hours it would be ready to go. We came back and he said it was fine. He had put a weight on the foot control and let it run for over half an hour, and it was fine. He told us what happened. It had some kind of something on it which was, so not to interfere with the television reception (you know, kind of like when the vacuum cleaner used to put lines through the picture...oh gosh, I'm showing my age!!!). Anyway, that is what was smoking, and that now it was done smoking. No need to replace anything and I could take it back home...no charge....so if anything like that happens to you, not to worry!

Yes, those old Vikings are awesome. I have a Husqvarna Model 21 (green and OLD). She sews like a dream and is so quiet!! Those old ones were made in Switzerland and precision. If yours has a circuit board in it, you might have a problem later, but even my Viking guy replaced a board in one of the ones I had, so it is still possible.

Have fun with your Viking!

BluePenny said...

I have two Vikings, a 20 year old 560ED serger and a 8 or 9 year old Quilt Designer sewing machine.

I plugged the serger in the day I bought it and have never had a problem with it. It has no electronics, so all I need to do is keep it clean and properly oiled. It gets a fair amount of use and still runs like a champ. It is the only serger Ive ever owned.

The sewing machine has never needed service. It takes anything I throw at it. I did find a service manual online, so I can take the shell off & clean it out myself when needed. Im usually much more comfortable with non-electronic machines, but this one has been a trooper.

My only gripe is the cost of Viking-branded presser feet & accessories. Thankfully it can use generic low-shank feet.

I used to recommend Vikings to others, until they moved their manufacturing from Sweden to Asia. One of the main reasons I bought Viking was because they *were not* made in Asia somewhere. Unfortunately, their prices have not dropped, despite the lower cost of Asian labor & manufacturing, which is a shame.

Anonymous said...

I purchased a used Viking 6440 over 20 years ago for $100. and have loved every minute of it. I later bought a newer 950E Viking, which is so complicated. I still use my old model more than anything. It is an iron horse and has never given me a problem. The belt is starting to squeak so I'll have to have it changed. Is this something easy to do. I have the side cover off and see the two belts and found where the squeak is coming from. Any suggestions?

Unknown said...

I had this exact model, purchased used as a college graduation present. I loved it, although it wasn't as smooth as my mom's Bernina 400 series.

One evening I was sewing, then left everything out to eat dinner. The sewing machine started sewing at a high rate of speed all by itself, then started smoking! If we hadn't been home there's no doubt the apartment would have caught on fire. It made me nervous to use it for a long time, even after getting it serviced.

Only 2 years ago I sold it to my friend for $50, with all the cams and an extra quarter inch foot, as I wasn't interested in vintage machines at the time. She uses it all the time, and now I've become interested in vintage machines.

It was nice to see an old friend on your blog. Thanks for the taking me down memory lane.

Jane said...

Have a Viking in this series. Straight and zigzag work beautifully but camstack's broken. Don't know if I feel like undertaking that repair job!

Unknown said...

If I remember right, this series uses the cams that attach in the rear of the machine. Is it the camstack gear that is broken? -Ed

Anonymous said...

I have a Husqvarna Viking model model 55 40 that my mother had (early 80's?). She didn't use it that much, so it's in really good condition. Does anyone have an idea of re-sale on something like this? Thanks in advance for thinking about it.

Anonymous said...

I just found a Viking Husqvarna 6020 at the thrift store and had the cam stack repaired. It sews beautifully, however I can't figure out how to change the cams to use the other stitches....

Anonymous said...

Gotta love the 6440. Bought mine around 1975; got too busy to sew, so it was stored until retirement in 2001. Dragged it out, took it to the local Viking Service Center; now it purrs like a kitten. When it breaks down I'll replace the motor before I try to replace it.

As for Husqvarna/Viking, when I started sewing a lot found out a Serger was needed, so bought the 936. Fell in love with embroidery and bought a Rose in 2006 (have upgraded twice since then). Yesterday I bought a Topaz 20 as backup for my Diamond SE. Needless to say, I don't even bother looking elsewhere for anything to do with sewing.

Anonymous said...

Viking 6020 cam changes.

Turn the cam knob on the front to the small dot. At this position (if everything else is OK) you should be able to remove the cam you have and swap in a different one.

Anonymous said...

I have a Husqvarna 21 E. When I plug in the foot peddle to the machine it starts sewing. I do not know how to shut it off. Any ideas?

Unknown said...

I do have some ideas but you don't provide enough background to make me look smart. Is this a new machine? portable or table model? Does it have the separate plugs for the motor and light that plug into a box that looks like a wall outlet? If the machine worked previously, did you perform any maintenance just before it stopped working? Help me help you. - Ed

Anonymous said...

Hi, Donald,

You need a new capacitor in you foot peddle, costs under 2 Dollars.

If you are not sure what to do, bring the machine to a radio rapair shop.

Your from Germany,

Tom

Louella said...

I have a Viking 6010 that sews forward and backward and zigzags but the knob to select the design stiches on the cam stack will not turn. What would cause this problem and/or how can it be fixed?

Unknown said...

I inherited a 6440 when my Grandmother passed away. It has no instruction manual with it. does anyone know where to find one for free online?

Edie said...

I have a 6440 that I bought in the mid 70's. I have used it quite abit and I love it. Recently, I have not been using for a number of years and it is frozen up also. Can you tell me how you unfroze it? Please help.

adischin said...

Heat gun and plenty of tri-flow will get things moving again. Look on the Yahoo group for Vintage Vikings, it's a great resource and can walk you thorough what I described.

Unknown said...

NOOOOO!!! No heat gun -I used a heat gun on an uncooperative Kenmore and melted the teeth on a plastic gear. If you don't have the patience to accomplish the task using oil and exercise, a hair dryer puts out a lower temperature that is safer than a heat gun. - Ed

Amy said...

I found a Viking 6010 - beautiful machine but really filthy on the inside when I found it. I have the same problem as a few others, one knob won't budge (the upper left one). I have dusted, vacuumed, oiled and used the blow dryer and it still doesn't want to turn. Any tips on how to proceed?

Unknown said...

So glad I found your site. I have a 6690 who the local repair shops informed me they couldn't fix because they coudn't get parts. Today I found a 6020 at goodwill for 15 bucks. I ive in the pacific northwest. Tacoma. Can you recomend someone around here to service these machines for me.

Unknown said...

Can anyone give me the model # (s) of the foot control/power cords I should look for for a 64 40? I found a beauty at the thrift store, she has all the cams & parts *except* the pedal. She was totally seized up but with only light work is showing some movement. I'd love to bring her back to life but trying to make an informed decision on whether to do so or just get her into hands to provide parts.

Nana Bluebird aka Kathy Aho said...

I just bought a secondhand Viking 6020 very similar to yours in your photos. I am searching for a manual if you know of a free PDF one someplace. Also my foot pedal works great except after about a minute when I take my foot off the gas, it keeps going and runs full speed no stopping until I unplug it from the wall. Do you think there is a way for me to check the foot pedal connections inside and what should they look like to run and stop whenI take my foot off?? Thanks for any insights. Kathy
Rockester @ Charter.net (with no spaces) THANK YOU! I want to sew with this machine. :D

Anonymous said...

Please please can someone help. I have a 6690 vikeing. Shame on me.it has set for a long long time.I have tried to use it but after it gets warmed up it goes crazy.going from stright stich to zig zag.is it the mother board that has gone bad.or is there some thing I can do to get to run more than 19 min. At a time.thanks for any help

Erica said...

I have a vintage 6440 that fell over (long story) and broke the thread guide- the one that raises and lowers in conjunction with the tension discs. Does anyone know where to find thus part?

Anonymous said...

I just received a viking 64 60 as a gift because I want to learn to sew and quilt. I don't know anything about how to use this machine yet but I have a friend who is wonderfully giving of her time and talents who will teach me the basics. Does anyone know what model of walking foot I will be needing to purchase and where I can find one?

Bev said...

What type of lubricant is used on a 6440? I have not used my machine for quite a while and it probably needs lubricating. It works fine. The knobs work but seem a little tight to me. May just be this way. I had the cam shaft replaced years ago as the teeth on the inside broke. Would I be able to do this procedure myself?

Anonymous said...

I am sorry I don't have the answer to your problem but I am wondering if the needle position for your 6010 is always on the left position when set for straight stitching? I cannot see how to set it in the center position. Thanks

Ann said...

Hello. I inherited a 64 30 model and am trying to sew with it. The side wheel that moves the needle won't move and I am also unable to get the stitch selector knob to move. Any suggestions?

Unknown said...

I have the same machine and the manual... I wonder if you're still in need... I could scan it and email it to you!

George said...

The tension seems really tight on my new-to-me 64 30 no matter what I do. It will sew for a few inches and then the thread breaks. Suggestions? Is this a lube / cleaning issue that I can fix on my own? Got videos? Or service centers in MA.?

Anonymous said...

Hello Stephanie Winter !
I just bought a Husqvarna model 6430 and I can't figure out how to use it. I would really appreciate if you can e-mail me your manual. (s.holenweg@yahoo.fr)
Thank you, thank you, thank you !
Have a beautiful day !
Sandy

Anonymous said...

I bought a Viking 6430 in the Spring to do some quilting with it. I am fairly new at sewing and I am having trouble with getting the machine to actually sew. When I first brought it home it worked fine. Some time passed and I tried it again.. It seems to be threaded correctly and the needle moves up and down but doesn't put any stitches into the material. Does anyone know what I might be doing incorrectly?

Anonymous said...

I got a new Viking from my parents in the early 1980's when I was a teenager and have had it ever since. A friend of mine who knew I was having some tension issues with it even after servicing saw a Viking 6440 at a thrift store and got it for me. I plugged it in, threading it and stitched a few stitches but it was stitching in reverse. While I was looking up where the reverse button is on YouTube, the machine started stitching by itself and then started smoking - I was not even near it. Luckily i was there to quickly unplug it and get it outside so our house didn't catch on fire! Very scary. I've never really thought about turning off and unplugging a sewing machine before leaving, but I will now, and I won't buy another Viking 6440.

Anonymous said...

Found 64 40 viking been stored for around 8 years,plugged it in hit the foot switch it took off.my grandmother showed me about sewing many years ago,think im going to give it a try.

Anonymous said...

When a Viking starts running by itself it is 99.9% likely to be a burnt out (and shorting) capacitor. In most machines this can be found under the cover that covers the electrical connections, though in some it may possibly be in the foot control housing. It is across the two wires to the foot control. It can be bought online for a couple of dollars : a 0.1uF (i.e. 100nF) 275Vac Class X2 Capacitor. It measures about 20mm x 15mm in side.
(The capacitor shorts out so current flows directly to the machine rather than via the foot control.)

Only a professional or someone who knows what they are doing should replace this item.

The capacitor suppresses radio interference by the machine. Without the capacitor in the circuit the machine it will work fine, so a simple fix is to remove it, though others in the household or neighbours are likely to complain of interference when the machine is running.



Wayne said...

I have been hunting all over the web for a copy of the manual for the 6440, and would be very keen for a copy. If you can do this, please send to whodgkinson@gmail.com Cheers. Wayne

Unknown said...

I have also been hunting for a service manual for Husqvarna 2000 Colormatic (maybe it,s the same service manual for all 2000 series).

Is there some kind person who can send me a copy of these for me to: ingmar.johansson55@gmail.com

Anonymous said...

Can anyone suggest what might be going on with my Viking 6440 machine? The right side clutch plate button will click in and out, though when I use the footplate to sew, the clutch wheel spins, whether it is pushed in to engage, or out. All front settings are in correct position.
Any suggestions ?

Jill said...

I have also been hunting for a service manual for Husqvarna 2000 SL.

Is there some kind person who can send me a copy of these for me to:
zilmozy@gmail.com

Thank you in advance!
Best regards
Jill
Australia

Barbara said...

I have a PDF copy of the manual for the 6440. If you have not received one let me know.

Barbara
seahorse@gvec.net

Barbara said...

Ingmar, I have that machine and do have a copy of the manual...let me know if you still need it.

Barbara
seahorse@gvec.net

Unknown said...

If anyone has a manual for the 6430 or even another 6000 series, I just bought one and would love a copy! Please email to jeany263@yahoo.com

Thank you! - Hallie

Unknown said...

If anyone has a manual for the 6430 or any 6000 series I would love a copy. Please email jeany263@yahoo.com

Thank you! Hallie

Unknown said...

I need a power cord/ foot pedal for a Viking 6440. Does anyone know how to find one?